8 83_350c10 New Member Joined Nov 26, 2013 Messages 2 Karma 0 Car 83 chevy c10 350 Nov 26, 2013 #1 hey there so i took off my valve covers and found these castings... 14102183.. G KM 31 on the block i have 5.7LG SGI on the front is VH234268
hey there so i took off my valve covers and found these castings... 14102183.. G KM 31 on the block i have 5.7LG SGI on the front is VH234268
Philip Moderator Staff member Joined Dec 10, 2013 Messages 39 Karma 4 Location Marana, AZ Car 72 Chevelle, 77 Nova Dec 15, 2013 #2 With the info you posted it could be an L98 350 engine. Is it fuel injected?
H hurst01 Moderator Staff member Joined Dec 21, 2012 Messages 186 Karma 20 Location Jeffersonville, Indiana Car 1929 Buick, 1957 Chevrolet Feb 13, 2014 #3 14101083...87-up...350..........Gen.I, also used on crate motors, 285 or 300 hp, 64cc chambers, 72' center manifold bolt angles
14101083...87-up...350..........Gen.I, also used on crate motors, 285 or 300 hp, 64cc chambers, 72' center manifold bolt angles
B Butchp56 New Member Joined May 5, 2020 Messages 1 Karma 0 Car 1956 Chevrolet May 5, 2020 #4 I'm curious about this too. The only information I can find is on 193 heads. That's clearly an 8! 183
I'm curious about this too. The only information I can find is on 193 heads. That's clearly an 8! 183
63Half-ton461 Moderator Staff member Joined Nov 18, 2019 Messages 150 Karma 27 Car 1978 Monte Carlo 383 slammed May 6, 2020 #5 If you look down the push rod side of the intake port can you see a vane cast in the bowl area ?